mirror of
https://github.com/isometimes/rpi4-osdev
synced 2024-11-13 22:00:40 +00:00
45 lines
2.8 KiB
Markdown
45 lines
2.8 KiB
Markdown
Writing a "bare metal" operating system for Raspberry Pi 4
|
|
==========================================================
|
|
|
|
Building on the RPi4 itself
|
|
---------------------------
|
|
|
|
It's possible (but not super-simple) to follow this tutorial on the Raspberry Pi without need for an additional build device.
|
|
|
|
Perhaps the easiest route is to firstly re-image your Pi to use the 64-bit Raspberry Pi OS (Beta), and then use a pre-built cross-compiler:
|
|
|
|
* Download a zipped _.img_ image file from the [64-bit image list](https://downloads.raspberrypi.org/raspios_arm64/images/), picking the newest update
|
|
* Unzip it and use the [Raspberry Pi Imager](https://www.raspberrypi.org/software/) to write it to your SD card, selecting "Use custom" from the options and pointing it at your downloaded _.img_ file
|
|
* Boot the Pi and follow the setup wizard to ensure you have a working Internet connection
|
|
* Just for luck, run `sudo apt update`
|
|
|
|
You'll then need to download a cross-compiler from the Arm website.
|
|
|
|
What you're looking for is the current [AArch64 ELF bare-metal target (aarch64-none-elf)](https://developer.arm.com/-/media/Files/downloads/gnu-a/10.2-2020.11/binrel/gcc-arm-10.2-2020.11-aarch64-aarch64-none-elf.tar.xz). If this link is somehow broken, you can use Google to search for "Arm GNU-A linux hosted cross compilers".
|
|
|
|
Then unpack the archive using `tar -xf <filename>`. You'll end up with a _gcc_ directory (albeit with a slightly longer name), which itself contains a _bin_ subdirectory, wherein you'll find the _gcc_ executable (again - with a longer name!). Remember this path.
|
|
|
|
Note: you can avoid re-imaging the Pi, by instead [building a cross-compiler yourself](https://wiki.osdev.org/GCC_Cross-Compiler).
|
|
|
|
Now let's build something:
|
|
|
|
* Use `git` to clone this repo: `git clone https://github.com/isometimes/rpi4-osdev.git`
|
|
* Decide which part you want to build - I like testing with _part5-framebuffer_ (it's visual, so you'll know when it works!)
|
|
* Copy the _Makefile.gcc_ to _Makefile_
|
|
* Edit the _Makefile_ and ensure the `GCCPATH` variable points to the _bin_ subdirectory where your cross-compiler is to be found
|
|
* Type `make` at the command line and it should build without errors
|
|
|
|
If you want to then boot with this, you'll need to copy the _kernel8.img_ file to a prepped SD card as the tutorial discusses. For the purposes of testing this process, I did the following (NOTE: it will trash your OS install unless you backup the old files so you can move them back later):
|
|
|
|
* `sudo cp kernel8.img /boot`
|
|
* Then edit _/boot/config.txt_ to include only these lines (for _part5-framebuffer_ anyway, otherwise read the tutorial in full for any necessary config changes for other parts...):
|
|
|
|
```c
|
|
hdmi_group=1
|
|
hdmi_mode=16
|
|
core_freq_min=500
|
|
```
|
|
|
|
Reboot and you should see the _part5-framebuffer_ demo firing up!
|
|
|
|
[Go to part1-bootstrapping >](./part1-bootstrapping/)
|