mirror of
https://github.com/isometimes/rpi4-osdev
synced 2024-11-25 03:30:39 +00:00
219 lines
9.8 KiB
Markdown
219 lines
9.8 KiB
Markdown
Writing a "bare metal" operating system for Raspberry Pi 4 (Part 3)
|
|
===================================================================
|
|
|
|
Making something happen
|
|
-----------------------
|
|
|
|
So far our OS produces only a black screen. How can we be sure that our code is actually running? Let's do something a bit more interesting to really demonstrate that we have control of the hardware.
|
|
|
|
Usually, the first thing a software developer learns is to print "Hello world!" to the screen. In bare metal development however, printing to the screen can be quite a big challenge, so we're going to do something simpler to start with.
|
|
|
|
Introducing the UART
|
|
--------------------
|
|
|
|
Perhaps the easiest way we can "send a message" from our OS is via the **UART** or serial communications circuit. UART stands for Universal Asynchronous Receiver/Transmitter and it's a very old and fairly simple interface that uses just two wires to communicate between two devices. Before USB came along, devices like mice, printers and modems were connected in this way.
|
|
|
|
We're going to connect your dev machine directly to your RPi4 and have the RPi4 send the "Hello world!" message to your dev machine! Your dev machine will print it to the screen.
|
|
|
|
You will need:
|
|
|
|
* A [USB to serial TTL cable](https://www.amazon.co.uk/gp/product/B01N4X3BJB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
|
|
* To [download and install drivers for the cable](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
|
|
* To [download and install PuTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html) on your dev machine
|
|
|
|
If you'd like to read up on serial communcation before we start, I recommend looking at the [SparkFun website](https://learn.sparkfun.com/tutorials/serial-communication/all).
|
|
|
|
Connecting the cable
|
|
--------------------
|
|
|
|
If you have the drivers installed, go ahead and connect the cable to a spare USB port on your dev machine. Very little will happen, but if you now open Control Panel, click on Device Manager and open the Ports section, you should see a "Prolific" entry. That tells us that your cable is working correctly.
|
|
|
|
Here's what my machine looks like:
|
|
|
|
|
|
|
|
Make a note of the COMx number in brackets after the Prolific entry - in my case, that's **COM5**.
|
|
|
|
Now we need to look at the RPi4 to identify how to connect the other end of the cable. You'll be looking for the **GPIO pins**, all 40 of them, which are just above the Raspberry Pi copyright notice.
|
|
|
|
The diagram below shows where you need to make connections. The BLACK connecter hooks over Ground (Pin 6), the WHITE over TXD (GPIO 14/Pin 8) and the GREEN over RXD (GPIO 15/Pin 10). As we are powering the RPi4 using a dedicated power supply, make sure you **don't connect the RED connector**.
|
|
|
|
|
|
|
|
Here's my RPi4 with the cable connected correctly:
|
|
|
|
|
|
|
|
Setting up PuTTY
|
|
----------------
|
|
|
|
* Run PuTTY on your dev machine
|
|
* Click on the "Session" category in the left-hand pane
|
|
* Set "Connection type" to Serial
|
|
* Click on "Serial" under the "Connection" category in the left-hand pane
|
|
* Set the "Serial line to connect to" to the COMx number we found above, mine was COM5
|
|
* Set the "Speed (baud)" to 115200
|
|
* Ensure "Data bits" is 8, "Stop bits" is 1, "Parity" is None and "Flow control" is None
|
|
* Click back to the "Session" category in the left-hand pane and you should see the changed settings
|
|
* Save these settings by typing a name e.g. "Raspberry Pi 4" in the textbox under "Saved Sessions" and clicking Save
|
|
* You can now start the connection by double-clicking on "Raspberry Pi 4" - if you do, all you will see for now is an empty black window
|
|
|
|
A quick config.txt change
|
|
-------------------------
|
|
|
|
Do you remember that, back in the first tutorial, I had to edit the _config.txt_ file on the SD card to get Raspbian up on my TV screen? Now we need to add a line to ensure that our UART connection will be reliable.
|
|
|
|
UART communication is a lot to do with timing, and it's important that both ends agree on the exact speed of data being sent/received. When we set up PuTTY, we told it to communicate at 115200 baud, and we'll need the RPi4 to communicate at the same rate. As it is, we can't be sure that it will - it might communicate faster or slower depending on how busy the CPU is.
|
|
|
|
Add this line to your _config.txt_ to resolve this:
|
|
|
|
```c
|
|
core_freq_min=500
|
|
```
|
|
|
|
Getting the UART going in code
|
|
------------------------------
|
|
|
|
First off, let's update _kernel.c_ to make a few new calls:
|
|
|
|
```c
|
|
#include "io.h"
|
|
|
|
void main()
|
|
{
|
|
uart_init();
|
|
uart_writeText("Hello world!\n");
|
|
while (1);
|
|
}
|
|
```
|
|
|
|
We start by including a new **header file**, _io.h_. This allows us to write some new code outside of the _kernel.c_ file, and call it in when we need it.
|
|
|
|
You'll note that our `main()` routine has also some new lines. First we call a function to initialise the UART, and then we call another function to write "Hello world!" to it. The weird character at the end of the string - `\n` - is how we add a newline to the end of our text, just like pressing Enter in a word processor!
|
|
|
|
Let's now create _io.h_ with the following contents:
|
|
|
|
```c
|
|
void uart_init();
|
|
void uart_writeText(char *buffer);
|
|
```
|
|
|
|
This is a very short file with two **function definitions**. `uart_init()` is a **void function** with no **parameters**, just like `main()` is. This means that it doesn't need any data from the caller to do its job, and it doesn't send any data back to the caller when it's done. You'll note that `uart_writeText` is also a void function, but it does take a parameter since we need to tell it what text to write!
|
|
|
|
We'll put the actual code for these functions in another new file, _io.c_:
|
|
|
|
```c
|
|
// GPIO
|
|
|
|
enum {
|
|
PERIPHERAL_BASE = 0xFE000000,
|
|
GPFSEL0 = PERIPHERAL_BASE + 0x200000,
|
|
GPSET0 = PERIPHERAL_BASE + 0x20001C,
|
|
GPCLR0 = PERIPHERAL_BASE + 0x200028,
|
|
GPPUPPDN0 = PERIPHERAL_BASE + 0x2000E4
|
|
};
|
|
|
|
enum {
|
|
GPIO_MAX_PIN = 53,
|
|
GPIO_FUNCTION_ALT5 = 2,
|
|
};
|
|
|
|
enum {
|
|
Pull_None = 0,
|
|
};
|
|
|
|
void mmio_write(long reg, unsigned int val) { *(volatile unsigned int *)reg = val; }
|
|
unsigned int mmio_read(long reg) { return *(volatile unsigned int *)reg; }
|
|
|
|
unsigned int gpio_call(unsigned int pin_number, unsigned int value, unsigned int base, unsigned int field_size, unsigned int field_max) {
|
|
unsigned int field_mask = (1 << field_size) - 1;
|
|
|
|
if (pin_number > field_max) return 0;
|
|
if (value > field_mask) return 0;
|
|
|
|
unsigned int num_fields = 32 / field_size;
|
|
unsigned int reg = base + ((pin_number / num_fields) * 4);
|
|
unsigned int shift = (pin_number % num_fields) * field_size;
|
|
|
|
unsigned int curval = mmio_read(reg);
|
|
curval &= ~(field_mask << shift);
|
|
curval |= value << shift;
|
|
mmio_write(reg, curval);
|
|
|
|
return 1;
|
|
}
|
|
|
|
unsigned int gpio_set (unsigned int pin_number, unsigned int value) { return gpio_call(pin_number, value, GPSET0, 1, GPIO_MAX_PIN); }
|
|
unsigned int gpio_clear (unsigned int pin_number, unsigned int value) { return gpio_call(pin_number, value, GPCLR0, 1, GPIO_MAX_PIN); }
|
|
unsigned int gpio_pull (unsigned int pin_number, unsigned int value) { return gpio_call(pin_number, value, GPPUPPDN0, 2, GPIO_MAX_PIN); }
|
|
unsigned int gpio_function(unsigned int pin_number, unsigned int value) { return gpio_call(pin_number, value, GPFSEL0, 3, GPIO_MAX_PIN); }
|
|
|
|
void gpio_useAsAlt5(unsigned int pin_number) {
|
|
gpio_pull(pin_number, Pull_None);
|
|
gpio_function(pin_number, GPIO_FUNCTION_ALT5);
|
|
}
|
|
|
|
// UART
|
|
|
|
enum {
|
|
AUX_BASE = PERIPHERAL_BASE + 0x215000,
|
|
AUX_ENABLES = AUX_BASE + 4,
|
|
AUX_MU_IO_REG = AUX_BASE + 64,
|
|
AUX_MU_IER_REG = AUX_BASE + 68,
|
|
AUX_MU_IIR_REG = AUX_BASE + 72,
|
|
AUX_MU_LCR_REG = AUX_BASE + 76,
|
|
AUX_MU_MCR_REG = AUX_BASE + 80,
|
|
AUX_MU_LSR_REG = AUX_BASE + 84,
|
|
AUX_MU_CNTL_REG = AUX_BASE + 96,
|
|
AUX_MU_BAUD_REG = AUX_BASE + 104,
|
|
AUX_UART_CLOCK = 500000000,
|
|
UART_MAX_QUEUE = 16 * 1024
|
|
};
|
|
|
|
#define AUX_MU_BAUD(baud) ((AUX_UART_CLOCK/(baud*8))-1)
|
|
|
|
void uart_init() {
|
|
mmio_write(AUX_ENABLES, 1); //enable UART1
|
|
mmio_write(AUX_MU_IER_REG, 0);
|
|
mmio_write(AUX_MU_CNTL_REG, 0);
|
|
mmio_write(AUX_MU_LCR_REG, 3); //8 bits
|
|
mmio_write(AUX_MU_MCR_REG, 0);
|
|
mmio_write(AUX_MU_IER_REG, 0);
|
|
mmio_write(AUX_MU_IIR_REG, 0xC6); //disable interrupts
|
|
mmio_write(AUX_MU_BAUD_REG, AUX_MU_BAUD(115200));
|
|
gpio_useAsAlt5(14);
|
|
gpio_useAsAlt5(15);
|
|
mmio_write(AUX_MU_CNTL_REG, 3); //enable RX/TX
|
|
}
|
|
|
|
unsigned int uart_isWriteByteReady() { return mmio_read(AUX_MU_LSR_REG) & 0x20; }
|
|
|
|
void uart_writeByteBlockingActual(unsigned char ch) {
|
|
while (!uart_isWriteByteReady());
|
|
mmio_write(AUX_MU_IO_REG, (unsigned int)ch);
|
|
}
|
|
|
|
void uart_writeText(char *buffer) {
|
|
while (*buffer) {
|
|
if (*buffer == '\n') uart_writeByteBlockingActual('\r');
|
|
uart_writeByteBlockingActual(*buffer++);
|
|
}
|
|
}
|
|
```
|
|
|
|
You'll see that the two functions we defined in our _io.h_ header file now have some actual code, along with some other supporting functions. I'll explain what's going on in this code in the next tutorial, but let's skip straight to the action now!
|
|
|
|
With your new _io.c_ and _io.h_ files in place, as well as the changes to _kernel.c_ made, run `make` to build your new OS.
|
|
|
|
Then:
|
|
|
|
* Copy the newly built _kernel8.img_ to the SD card, and then put the SD card into your RPi4
|
|
* Make sure your USB to serial TTL cable is connected correctly
|
|
* Run PuTTY and double-click your "Raspberry Pi 4" session - you should see an empty black screen and no errors
|
|
* Power on your RPi4
|
|
|
|
If you've followed all these instructions, after a few seconds you'll see "Hello world!" appear in your PuTTY window on your dev machine.
|
|
|
|
_It's a message from your RPi4 to say that your OS is working. Proof at last!_
|
|
|
|
[Go to part4-miniuart >](../part4-miniuart)
|