mirror of
https://github.com/isometimes/rpi4-osdev
synced 2024-09-19 13:32:56 +00:00
53 lines
1.3 KiB
Text
53 lines
1.3 KiB
Text
# For more options and information see
|
|
# http://rptl.io/configtxt
|
|
# Some settings may impact device functionality. See link above for details
|
|
|
|
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
#dtparam=i2c_arm=on
|
|
#dtparam=i2s=on
|
|
#dtparam=spi=on
|
|
|
|
# Enable audio (loads snd_bcm2835)
|
|
dtparam=audio=on
|
|
|
|
# Additional overlays and parameters are documented
|
|
# /boot/firmware/overlays/README
|
|
|
|
# Automatically load overlays for detected cameras
|
|
camera_auto_detect=1
|
|
|
|
# Automatically load overlays for detected DSI displays
|
|
display_auto_detect=1
|
|
|
|
# Automatically load initramfs files, if found
|
|
auto_initramfs=1
|
|
|
|
# Enable DRM VC4 V3D driver
|
|
dtoverlay=vc4-kms-v3d
|
|
max_framebuffers=2
|
|
|
|
# Don't have the firmware create an initial video= setting in cmdline.txt.
|
|
# Use the kernel's default instead.
|
|
disable_fw_kms_setup=1
|
|
|
|
# Run in 64-bit mode
|
|
arm_64bit=1
|
|
|
|
# Disable compensation for displays with overscan
|
|
disable_overscan=1
|
|
|
|
# Run as fast as firmware / board allows
|
|
arm_boost=1
|
|
|
|
[cm4]
|
|
# Enable host mode on the 2711 built-in XHCI USB controller.
|
|
# This line should be removed if the legacy DWC2 controller is required
|
|
# (e.g. for USB device mode) or if USB support is not required.
|
|
otg_mode=1
|
|
|
|
[all]
|
|
kernel_old=1
|
|
disable_commandline_tags=1
|
|
core_freq_min=500
|
|
hdmi_group=1
|
|
hdmi_mode=16
|