mirror of
https://github.com/isometimes/rpi4-osdev
synced 2024-11-08 19:30:39 +00:00
edit makefile for copying image and config to sd card
This commit is contained in:
parent
c71a1cc18a
commit
0bd322d7b7
4 changed files with 65 additions and 27 deletions
|
@ -1,20 +1,25 @@
|
|||
BOOTMNT ?= /media/cvdeveloper/bootfs
|
||||
|
||||
CFILES = $(wildcard *.c lib/*.c kernel/*.c net/*.c tcpip/*.c)
|
||||
SFILES = $(wildcard boot/*.S lib/*.S kernel/*.S)
|
||||
OFILES = $(CFILES:.c=.o) $(SFILES:.S=.o)
|
||||
LLVMPATH = /opt/homebrew/opt/llvm/bin
|
||||
CLANGFLAGS = -Wall -O0 -ffreestanding -nostdlib -mcpu=cortex-a72+nosimd
|
||||
GCCFLAGS = -Wall -O0 -ffreestanding -nostdlib -nostartfiles
|
||||
GCCPATH = ../../gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin
|
||||
|
||||
all: clean kernel8.img
|
||||
|
||||
%.o: %.c
|
||||
$(LLVMPATH)/clang --target=aarch64-elf $(CLANGFLAGS) -c $< -o $@
|
||||
$(GCCPATH)/aarch64-none-elf-gcc $(GCCFLAGS) -c $< -o $@
|
||||
|
||||
%.o: %.S
|
||||
$(LLVMPATH)/clang --target=aarch64-elf $(CLANGFLAGS) -c $< -o $@
|
||||
$(GCCPATH)/aarch64-none-elf-gcc $(GCCFLAGS) -c $< -o $@
|
||||
|
||||
kernel8.img: $(OFILES)
|
||||
$(LLVMPATH)/ld.lld -m aarch64elf -nostdlib $(OFILES) -T boot/link.ld -o kernel8.elf
|
||||
$(LLVMPATH)/llvm-objcopy -O binary kernel8.elf kernel8.img
|
||||
$(GCCPATH)/aarch64-none-elf-ld -nostdlib $(OFILES) -T boot/link.ld -o kernel8.elf
|
||||
$(GCCPATH)/aarch64-none-elf-objcopy -O binary kernel8.elf kernel8.img
|
||||
cp kernel8.img $(BOOTMNT)/kernel8.img
|
||||
cp config.txt $(BOOTMNT)/
|
||||
sync
|
||||
|
||||
clean:
|
||||
/bin/rm kernel8.elf */*.o *.img > /dev/null 2> /dev/null || true
|
||||
|
|
|
@ -1,20 +0,0 @@
|
|||
CFILES = $(wildcard *.c lib/*.c kernel/*.c net/*.c tcpip/*.c)
|
||||
SFILES = $(wildcard boot/*.S lib/*.S kernel/*.S)
|
||||
OFILES = $(CFILES:.c=.o) $(SFILES:.S=.o)
|
||||
GCCFLAGS = -Wall -O0 -ffreestanding -nostdlib -nostartfiles
|
||||
GCCPATH = ../../gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin
|
||||
|
||||
all: clean kernel8.img
|
||||
|
||||
%.o: %.c
|
||||
$(GCCPATH)/aarch64-none-elf-gcc $(GCCFLAGS) -c $< -o $@
|
||||
|
||||
%.o: %.S
|
||||
$(GCCPATH)/aarch64-none-elf-gcc $(GCCFLAGS) -c $< -o $@
|
||||
|
||||
kernel8.img: $(OFILES)
|
||||
$(GCCPATH)/aarch64-none-elf-ld -nostdlib $(OFILES) -T boot/link.ld -o kernel8.elf
|
||||
$(GCCPATH)/aarch64-none-elf-objcopy -O binary kernel8.elf kernel8.img
|
||||
|
||||
clean:
|
||||
/bin/rm kernel8.elf */*.o *.img > /dev/null 2> /dev/null || true
|
53
part15-tcpip-webserver/config.txt
Normal file
53
part15-tcpip-webserver/config.txt
Normal file
|
@ -0,0 +1,53 @@
|
|||
# For more options and information see
|
||||
# http://rptl.io/configtxt
|
||||
# Some settings may impact device functionality. See link above for details
|
||||
|
||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
||||
#dtparam=i2c_arm=on
|
||||
#dtparam=i2s=on
|
||||
#dtparam=spi=on
|
||||
|
||||
# Enable audio (loads snd_bcm2835)
|
||||
dtparam=audio=on
|
||||
|
||||
# Additional overlays and parameters are documented
|
||||
# /boot/firmware/overlays/README
|
||||
|
||||
# Automatically load overlays for detected cameras
|
||||
camera_auto_detect=1
|
||||
|
||||
# Automatically load overlays for detected DSI displays
|
||||
display_auto_detect=1
|
||||
|
||||
# Automatically load initramfs files, if found
|
||||
auto_initramfs=1
|
||||
|
||||
# Enable DRM VC4 V3D driver
|
||||
dtoverlay=vc4-kms-v3d
|
||||
max_framebuffers=2
|
||||
|
||||
# Don't have the firmware create an initial video= setting in cmdline.txt.
|
||||
# Use the kernel's default instead.
|
||||
disable_fw_kms_setup=1
|
||||
|
||||
# Run in 64-bit mode
|
||||
arm_64bit=1
|
||||
|
||||
# Disable compensation for displays with overscan
|
||||
disable_overscan=1
|
||||
|
||||
# Run as fast as firmware / board allows
|
||||
arm_boost=1
|
||||
|
||||
[cm4]
|
||||
# Enable host mode on the 2711 built-in XHCI USB controller.
|
||||
# This line should be removed if the legacy DWC2 controller is required
|
||||
# (e.g. for USB device mode) or if USB support is not required.
|
||||
otg_mode=1
|
||||
|
||||
[all]
|
||||
kernel_old=1
|
||||
disable_commandline_tags=1
|
||||
core_freq_min=500
|
||||
hdmi_group=1
|
||||
hdmi_mode=16
|
|
@ -59,7 +59,7 @@ ENC_HandleTypeDef handle;
|
|||
unsigned char myMAC[6] = { 0xc0, 0xff, 0xee, 0xc0, 0xff, 0xee };
|
||||
|
||||
// IP address to be assigned to the ENC28J60
|
||||
unsigned char deviceIP[4] = { 192, 168, 0, 66 };
|
||||
unsigned char deviceIP[4] = { 10, 7, 3, 20 };
|
||||
|
||||
void init_network(void)
|
||||
{
|
||||
|
|
Loading…
Reference in a new issue