diff --git a/man/man7/package.7 b/man/man7/package.7 deleted file mode 100644 index a41ace0..0000000 --- a/man/man7/package.7 +++ /dev/null @@ -1,88 +0,0 @@ -.Dd $Mdocdate: November 20 2022 $ -.Dt PACKAGE 7 -.Os Telodendria Project -.Sh NAME -.Nm package -.Nd Some guidelines for packaging Telodendria for your system. -.Sh DESCRIPTION -.Pp -Telodendria is distributed at source code, and does not offer a convenient -install process. This is intentional; the Telodendria project is primarily -concerned with developing Telodendria itself, not packaging it for the -hundreds of different operating systems and Linux distributions that exist. -It is my firm belief that distributing an open source project is not the -job of the open source developer; that's the reason software distributions -exist, to collect and distribute software. -.Pp -It would be impossible to package Telodendria for every platform, because -each platform has very different expectations for software. Even different -Linux distributions have different conventions for where manual pages, -binaries, and configuration files go. -.Pp -That being said, this page aims to assist those who want to package -Telodendria, or just install it from source, though that's not recommended. -.Pp -See -.Xr td 8 -for instructions on how to build Telodendria. Only proceed with packaging -Telodendria after you have successfully built it on your operating system. -.Pp -To package Telodendria, you should collect the following files, and figure -out where they should be installed for your system: -.Bl -bullet -.It -The telodendria server binary itself: -.Pa build/telodendria -.It -All manual pages in the -.Pa man/ -directory that are prefixed with "telodendria". These are the user documentation -pages. All pages that do not have the "telodendria" prefix are intended only -for developers, and so do not need to be installed to the system. -.It -An init script. People that wish to install Telodendria to their system -expect it to be integrated enough that Telodendria can be easily started at -boot, and otherwise managed by the system's daemon tools, be it systemd, or -another init system. Consult your system's documentation for writing an -init script. Do note that Telodendria does not fork itself to the background; -the init script should do that. Also note that Telodendria responds to SIGINT, -so a SIGINT should be sent to stop Telodendria instead of a SIGTERM or SIGKILL. -.It -A sample -.Pa telodendria.conf -file. Whether this file is placed at the actual configuration file location, -or a directory containing configuration file samples is entirely up to the -packager. You can use or adapt any of the configuration files in -.Pa contrib/ , -or write your own specifically for your package. -.El -.Pp -Once you have collected the files that need to be installed, make sure your -package performs the following tasks on install: -.Bl -bullet -.It -If necessary, depending on the config used, create a new system user for -the Telodendria daemon to run as. -.It -If conventional for your system, enable the Telodendria init script so -that Telodendria is started on system boot. -.It -Insruct the user to carefully read the sample -.Pa telodendria.conf -as well as the -.Xr telodendria.conf 5 -manual page before starting Telodendria. -.El -.Pp -The goal of a package should be to get everything as ready-to-run as possible. -The user should only have to change one or two default options in the configuration -file before Telodendria can be started. -.Pp -Remember to publicly document the setup of Telodendria on your platform so -that users can easily get Telodendria running. If you're packaging Telodendria -for a containerization system such as Docker, you can omit the things that -containers typically do not have, such as the init script and man pages. -.Sh SEE ALSO -.Xr telodendria-contributing 7 , -.Xr td 8 , -.Xr telodendria 7 diff --git a/man/man7/porting.7 b/man/man7/porting.7 new file mode 100644 index 0000000..81a4273 --- /dev/null +++ b/man/man7/porting.7 @@ -0,0 +1,159 @@ +.Dd $Mdocdate: November 20 2022 $ +.Dt PORTING 7 +.Os Telodendria Project +.Sh NAME +.Nm porting +.Nd Some guidelines for packaging Telodendria for your operating system. +.Sh DESCRIPTION +.Pp +Telodendria is distributed at source code, and does not offer a convenient +install process. This is intentional; the Telodendria project is primarily +concerned with developing Telodendria itself, not packaging it for the +hundreds of different operating systems and Linux distributions that exist. +It is my firm belief that distributing an open source project is not the +job of the open source developer; that's the reason software distributions +exist, to collect and distribute software. +.Pp +It would be impossible to single-handedly package Telodendria for every +platform, because each platform has very different expectations for +software. Even different Linux distributions have different conventions +for where manual pages, binaries, and configuration files go. +.Pp +That being said, this page aims to assist those who want to package +Telodendria for their operating system or software distribution. +.Pp +See +.Xr td 8 +for instructions on how to build Telodendria. Only proceed with packaging +Telodendria after you have successfully built it on your operating system. +.Pp +To package Telodendria, you should collect the following files, and figure +out where they should be installed for your system: +.Bl -bullet +.It +The telodendria server binary itself: +.Pa build/telodendria +.It +All manual pages in the +.Pa man/ +directory that are prefixed with "telodendria". These are the user documentation +pages. All pages that do not have the "telodendria" prefix are intended only +for developers, and so do not need to be installed to the system. +.It +An init script. People that wish to install Telodendria to their system +expect it to be integrated enough that Telodendria can be easily started at +boot, and otherwise managed by the system's daemon tools, be it systemd, or +another init system. Consult your system's documentation for writing an +init script. Do note that Telodendria does not fork itself to the background; +the init script should do that. Also note that Telodendria responds to SIGINT, +so a SIGINT should be sent to stop Telodendria instead of a SIGTERM or SIGKILL. +.It +A sample +.Pa telodendria.conf +file. Whether this file is placed at the actual configuration file location, +or a directory containing configuration file samples is entirely up to the +packager. You can use or adapt any of the configuration files in +.Pa contrib/ , +or write your own specifically for your package. +.El +.Pp +Once you have collected the files that need to be installed, make sure your +package performs the following tasks on install: +.Bl -bullet +.It +If necessary, depending on the config used, create a new system user for +the Telodendria daemon to run as. +.It +If conventional for your system, enable the Telodendria init script so +that Telodendria is started on system boot. +.It +Insruct the user to carefully read the sample +.Pa telodendria.conf +as well as the +.Xr telodendria.conf 5 +manual page before starting Telodendria. +.El +.Pp +The goal of a package should be to get everything as ready-to-run as possible. +The user should only have to change one or two default options in the configuration +file before Telodendria can be started. +.Pp +Remember to publicly document the setup of Telodendria on your platform so +that users can easily get Telodendria running. If you're packaging Telodendria +for a containerization system such as Docker, you can omit the things that +containers typically do not have, such as the init script and man pages. +.Pp +Also remember that your port should feel like it belongs on your target system. +Follow all of your system's conventions when placing files on the filesystem, +so your users know what to expect. The goal is not to have a unified experience +across all operating systems, rather, you should cater to the opinions of your +operating system. Telodendria is architected in such a way that it does not +impose the developers opinions of where things should go. +.Sh PORTS REPOSITORY +.Pp +The Telodendria project provides a +.Pa Telodendria-Ports +repository that is intended to serve as the official staging environment for +ports and packages of Telodendria to various operating systems. You can +most likely take inspiration from the files stored in this repository, or even +straight up copy and modify files for your own port if you'd like. +Telodendria-Ports is a convenient resource for new porters. You can grab +a copy of the ports repository like this: +.Bd -literal -offset indent +$ cvs -d anoncvs@bancino.net:/cvs checkout -P Telodendria-Ports +.Ed +.Pp +(It is assumed that you have read +.Xr telodendria-contributing 7 , +so you already have the proper tools for getting the ports repository.) +.Pp +The repository is structured in such a way that each operating system or +software distribution has a directory. For example, the OpenBSD port has an +.Pa OpenBSD/ +directory. If you make a HaikuOS port, then make a +.Pa HaikuOS/ +directory. +.Pp +The structure of the operating system directories themselves is really defined +by the conventions of the packaging system you're working with. There's no standard +structure, as each system does things differently. Just use the directory as a +working space that stores all the files your packaging system needs to build +a package for Telodendria. +.Pp +The exact procedure for interacting with this repository is also defined by how +your packaging system works. For OpenBSD, one is required to copy the +.Pa OpenBSD/ +directory to +.Pa /usr/ports/net/telodendria , +and then copy files back and forth when modifications are made. You may be able +to get away with building your package in place, without having to copy files +anywhere. Otherwise, you can try symlinking directories, but OpenBSD ports did +not like this at all. +.Pp +Submitting your port files to Telodendria-Ports is by no means required, +but it may be helpful to have a public record that you're working on a port, +and it's definitely helpful to have a consolidated list of all the ports out +there, making it much easier to determine whether or not a given platform +has a port, especially if you're unfamilier with that platform's port system. +If you are capable of managing your port entirely within your packaging system, +then go for it! I just wanted a staging environment that I have commit access to +for my ports, allowing me to prototype and test my port before submitting it +to the actual ports tree. +.Pp +It is important to note that I only maintain the OpenBSD port, because that's +the operating system I use. But, notice that I follow my own rules; nothing +inherently OpenBSD-specific, besides a few optional files in +.Pa contrib/ , +actually exists in the main repository. All operating-system specific files, +such as init scripts and the like, should go to Telodendria-Ports. It's also +important to note that the files placed in Telodendria-Ports are not automatically +assumed to be official builds. The developer that committed the files to +Telodendria-Ports will most likely also have to get them submitted upstream, +because I'm not going to go to all these upstream packagers with the port files +here, I'll only do that with ports I officially maintain, which is the +OpenBSD port. +.Pp +.Sh SEE ALSO +.Xr telodendria-contributing 7 , +.Xr td 8 , +.Xr telodendria 7 diff --git a/man/man7/telodendria.7 b/man/man7/telodendria.7 index 4ffbb3f..28a2d6e 100644 --- a/man/man7/telodendria.7 +++ b/man/man7/telodendria.7 @@ -1,4 +1,4 @@ -.Dd $Mdocdate: November 18 2022 $ +.Dd $Mdocdate: November 20 2022 $ .Dt TELODENDRIA 7 .Os Telodendria Project .Sh NAME @@ -64,8 +64,10 @@ ll. #telodendria:bancino.net;The public "space" room. #telodendria-releases:bancino.net;Get notified of new releases. #telodendria-general:bancino.net;General discussion and support. +#telodendria-newsletter:bancino.net;Periodic status updates. #telodendria-issues:bancino.net;Report bugs and issues. #telodendria-patches:bancino.net;Submit code patches to the project. +#telodendria-ports:bancino.net;Discussion about porting and packaging. .TE .Pp .Nm diff --git a/site/index.html b/site/index.html index b1aa9a1..aa6868b 100644 --- a/site/index.html +++ b/site/index.html @@ -111,7 +111,7 @@ package yourself.

If your operating system does not have a package or port of Telodendria, please consult the -package(7) page for guidelines +porting(7) page for guidelines related to packaging Telodendria for your system.

Documentation

@@ -162,10 +162,10 @@ Contributing guide. Description -package(7) +porting(7) -Want to package Telodendria for your operating system, or just install it to -your system from source? Look no further than this page. +Want to package Telodendria for your operating system? +Look no further than this page.