Telodendria

Telodendria: The terminal branches of an axon.

Note: Telodendria is under heavy development. Please see the Project Status.

Telodendria is a Matrix homeserver implementation written from scratch in ANSI C. It is designed to be lightweight and simple, yet functional. Telodendria differentiates itself from other Matrix homeserver implementations because it:

• Is written in C, a stable, low-level programming language with a long history, low build and runtime overhead, and wide compatibility.
• Is written with minimalism as a primary design goal. Whenever possible and practical, no third-party libraries are pulled in to the source code. Everything Telodendria needs is custom written. As a result, Telodendria depends only on a standard C compiler and POSIX C library to be built, both of which are built in to a good Unix-style operating system already, which means you shouldn't have to install anything extra.
• Uses a flat-file directory structure to store data instead of a database. This has a number of advantages:
  • It makes setup and maintenance much easier.
  • It allows Telodendria to run on systems with fewer resources.
  • It provides both runtime and data safety and stability. Since no database is running, there's fewer things that could go wrong because there's a lot less code running on the system.
• Is packaged as a single small, statically-linked and highly-optimized binary that can be run just about anywhere. It is designed to be extremely easy to set up and consume as few resources as possible.
• Is permissively licensed. Telodendria is licensed under a modified MIT license, which imposes few restrictions on what you can do with it.

Telodendria is on Matrix! Check out the official Matrix rooms:

Table of Contents

• Telodendria
  • Table of Contents
  • Download
  • Building The Source
  • Configure Telodendria
  • Project Status
    • Phase 1: Getting Off The Ground
    • Phase 2: Building A Foundation
    • Phase 3: Welcome To Matrix
    • Phase 4: A Real Homeserver
  • Documentation Status
  • Rationale
  • Project Goals
  • Getting Support
  • Contributing
    • Reporting Issues
    • Developing
      • Getting The Code
      • Code Style
      • Submitting Patches
  • License
  • Contributors
  • Change Log
  • Resources

Download

Telodendria is distributed as source tarballs, in true Unix fashion. If you want, you can verify the checksum of your download, and check the signature. To check the signature, you'll need signify, and the signify public key: telodendria-signify.pub.

If your operating system has an official package or port of Telodendria, you should prefer to use that instead of manually downloading the source and building it. If your operating system's package or port is too out of date for your tastes, please contact the package's maintainers to notify them, or offer to update the package yourself.

You can check out the change log here.

Building The Source

Telodendria is designed to be light enough that it can be built from source on just about any operating system. It only has the following requirements, all of which should be already available to you on a sufficiently complete operating system:

• A standards-compliant C compiler with a POSIX.1c standard library. Because Telodendria is written in ANSI C and sticks to POSIX.1c features, it should compile on almost any compiler and operating system with minimal effort, but the following compilers and operating systems are known to work:
  • GCC on Linux
  • Clang on OpenBSD
  • Tiny C Compiler (Note: must edit make.sh and remove -Wl,-static -Wl,-gc-sections from LDFLAGS) on OpenBSD.
  Other compilers should work as well, but you may have to play with the flags in make.sh.
• POSIX base utilities, including find, stat, env, and compliant sh-like shell.

If everything went well, that will produce build/telodendria, which you can then place wherever you want, and run as a system daemon. See the contrib folder for configuration examples.

Configure Telodendria

Once you get Telodendria built, you will have to write a configuration file for it. The configuration file is a simple OpenBSD-style configuration file, which should be called telodendria.conf.

Project Status

Telodendria is a very ambitious project. There's a lot that needs to happen yet before it is usable. At the moment, there's nothing that even remotely ressembles a Matrix homeserver here; I'm still getting off the ground and building a foundation.

But just because there's nothing here yet doesn't mean you should go away! I could always use help, so you are more than welcome to help out if you want things to go quicker. Please see the Contributing section for details on how you can get involved.

Phase 1: Getting Off The Ground

• Name this project
• Set up a CVS repository
• Make CVS repository public
• Write a coding style guide
• Write a build script
• Add a license
• Add support and issue reporting guide
• Add table of contents to this document

Phase 2: Building A Foundation

• Implement an array
• Implement a logging facility
• Implement argument parsing (-c file -Vh)
• Implement a hash map
• Combine library code files
• Implement configuration file parsing using the hash map
• Base64 encoding/decoding with padded/unpadded support
• Write a release script
• UTF-8 encoder
• Implement a JSON library using the hash map and array
  • Basic encoding from HashMap/Array/strings, etc.
  • Basic decoding to HashMap/Array/strings, etc.
  • Proper string encoding
  • Proper string decoding
  • Canonical JSON
    • Keys are sorted lexicographically
    • Floats are not allowed (ignore any float values)
    • Encode as UTF-8 instead of using \u escapes
    • Decode encoded strings to UTF-8
• Write a function that gets the current Unix timestamp in milliseconds.
• Figure out how to wWrite unit tests for array/hashmap/etc
• Parse the Telodendria config file
• Add license/documentation comments to all source files
• Implement a simple HTTP server
• Design the server architecture
  • Route requests
  • Handle requests
  • Data abstraction layer
  • Error generation

Phase 3: Welcome To Matrix

• Implement the Client-Server API
• Implement the Server-Server API
• Implement the other Matrix APIs

Phase 4: A Real Homeserver

• Create an OpenBSD package and get it submitted to ports
• Create a command line tool to manage Telodendria
  • Configuration file generation
  • User management
  • Room management
• Migrate from Synapse. I run a Synapse homeserver right now, so somehow I have to get all my data into the Telodendria format.

Documentation Status

This documentation needs just a little work. Here's the things on my list for that:

• Update Rationale section
• Update Project description (no longer a CGI binary)
• Update project code requirements (ANSI C, POSIX.1c)
• Clean up dark mode colors (tables, background, code snippets)
• Add logo (possibly center title?)
• Update Code Style to not include indent or line rules, but to use indent(1) instead.
• Fix typo "Subitting Patches" in Table of Contents
• Make a note in Getting The Code that the password for the anoncvs account is just anoncvs.
• Add Contributors list
• Add list of make.sh recipes, and what they do

Rationale

I want a lightweight Matrix homeserver designed specifically for OpenBSD and other Unix-like operating systems. I want a homeserver that can be developed in vi(1) and compiled with the built-in C compiler. I want it to function entirely on a base OS install without having to install any extra packages whatsoever. I've found that as far as these priorities are concerned, the existing homeserver implementations fall tremendously short. This project aims to point out that existing homeserver implementations are way over-engineered and written in such a way that many programs and libraries have to be pulled in to use them.

I also want to learn how Matrix works, and I want to understand the code I'm running on my server, which is why I'm writing every component from scratch, even the HTTP server.

Telodendria doesn't use a database like all the other homeservers. Instead, it operates more like email: it uses a flat-file data structure similar to Maildir to store data. The advantage of this is that it saves server maintainers from also having to maintain a database. It greatly simplifies the process of getting a Matrix homeserver up and running, and it makes it highly portable. It also is extremely easy to back up and restore with base tools; just tar(1) up the directory, and you're good to go.

Telodendria is developed and tested on OpenBSD, but you'll find that it should just run on any POSIX operating system without modification.

Project Goals

The goals of this project are generally divided into user goals, and developer goals, depending on who they impact the most. This isn't an exhaustive list, but it is a list of things that I want to prioritize, because other server implementations lack them.

The user goals are as follows:

• To be a production-ready Matrix server capable of handling a lot of users. Telodendria should have good performance in many diverse environments. It should scale up well for large instances, and yet also be able to scale down to a peer-to-peer device.
• To be easier to configure than any of the other Matrix homeserver implementations. The configuration file should be flexible, well-documented, and easy to understand and modify. An intuitive command-line tool for administrative tasks should also be available.

The developer goals are as follows:

• To have as few external build and run dependencies as possible. It should be possible to compile Telodendria on any POSIX operating system right out of the box, and have it be totally statically linked, ready to run under a chroot(8). You'll even notice that the documentation is written in HTML directly, not Markdown, to remove the dependency on a Markdown parser and renderer.
• To have a simple yet elegant workflow, and not depend on any large or complex development tools, such as code forges. The entire development workflow should be able to be successfully and efficiently completed on a base OpenBSD install. Of course you don't have to use OpenBSD for development by any means, but the point is, the workflow should not require a lot of tools.
• To be written in clean, elegant, and well-documented code. The goal is to build a Matrix homeserver from the ground up, not just because I don't like the way existing homeservers are implemented, but also so I can learn how Matrix really works, and maybe even teach others along the way.

Getting Support

Telodendria is designed to be fairly straightforward, but that doesn't mean there won't be hiccups along the way. If you are struggling to get Telodendria up and running, you're more than welcome to reach out for support. Just join the #telodendria-general:bancino.net Matrix channel. Before you do though, make sure you're running the latest version of Telodendria and you've thoroughly read through all the relevant documentation.

Contributing

Telodendria is an open source project. As such, it welcomes contributions. There are many ways you can contribute, and any way you can is greatly appreciated.

Reporting Issues

If—after you've reached out to #telodendria-general:bancino.net—it has been determined that there is a problem with Telodendria, it should be reported to #telodendria-issues:bancino.net. There it can be discussed further. The issues room serves as the official issue tracker of Telodendria; although severe issues may be copied into a TODO file in the CVS repository just so they don't get lost.

Developing

The primary language used to write Telodendria code is ANSI C. Yes, that's the original C standard from 1989. The reason this standard is chosen, and the reason that it will not be changed, is because the original C is the most portable. Other languages you'll find in the Telodendria repository are shell scripts and HTML. If you have any experience at all with any of these languages, your contributions are valuable. Please follow the guidelines in this section to ensure the contribution workflow goes as smoothly as possible.

Getting The Code

If you'd like to hack on Telodendria, you'll need the following tools in addition to the tools required to build the source:

• cvs for checking out and updating a local copy of the source code.
• indent for formatting your code before generating patches
• patch for applying patches to your local copy of the source code.

Note that all of these tools are built into OpenBSD. While you of course don't have to use OpenBSD to develop Telodendria, it may make the process a little easier. In fact, these tools were chosen precisely because they were built into OpenBSD, the operating system I use.

You can download an official release tarball if you would really like, but the preferred way is to check out the source code from CVS. This makes generating patches a lot easier.

The password for the anoncvs account is simply anoncvs.

You should now have the latest Telodendria source code. Follow the Code Style as you make your changes.

Code Style

In general, these are the conventions used by the code base. This guide may be slightly outdated or subject to change, however. The source code itself is the absolute source of truth, so as long as you make your code look like the code surrounding it, you should be fine.

• All function, enumeration, structure, and header names are CamelCase. This is preferred to snake_case because it is more compact.
• All variable names are lowerCamelCase. This is preferred to snake_case because it is more compact.
• enums and structs are always typedef-ed to their same name. The typedef occurs in the public API header, and the actual declaration occurs in the implementation file.
• A feature of the code base lives in a single .c file that has a matching header file. The header file should only export public symbols, everything else in the .c file should be static.
• Anywhere curly braces are optional, there must still be curly braces. This makes it easy to add on to the code later, and just makes things less ambiguous.

As far as actually formatting the code goes, such as where to put brackets and whether you use tabs or spaces, use indent(1) to take care of all of that. The root of the repository has a .indent.pro file that should automatically be loaded by indent(1) to set the correct rules. If you don't have access to a working indent(1), just indicate in your patch that I should run indent(1) on the code after applying it. I'll likely run my indent(1) on the code anyway though, just to make sure the spacing is consistent, if nothing else.

Submitting Patches

Telodendria aims at remaining as minimal as possible. This doesn't just mean minimal code, it also means a minimal development process, which is why Telodendria doesn't use GitHub, GitLab, or even SourceHut. Instead, the contribution workflow operates on submitting patch files to a public Matrix room, sort of like the OpenBSD project operates on patch files sent to a public mailing list.

If you're not used to manually creating and submitting patches instead of opening a "pull request," you should be pleased to hear that submitting patches is fairly easy to do if you've got the CVS sources checked out. In fact, I find it easier than having to make a GitHub account, forking a project repository, and then making a pull request for it. Once you have made your changes in your local copy of the code, just run cvs diff:

At this point, it would be a good idea to open up your patch file in your preferred editor and look it over to make sure everything looks good. While you have the file open, you should also add some email-style headers to the top of your patch file, for quick identification:

Obviously, set the actual values to your own information. From should be your name and Matrix ID, and Date should be in the format %Y-%m-%d. The Subject should very briefly describe what the patch is about. Below these headers, write a more in-depth description of the patch.

Then, send the resulting patch file to #telodendria-patches:bancino.net, so it can be discussed and reviewed by the community. If you don't have a Matrix account, and you really don't want to create one—ignoring how odd it is that you are trying to contribute to a Matrix homeserver project—you can email your patches to jordan@bancino.net. However, the preferred way of submitting patches is to the official Matrix room, so I will upload your patch there along with your email address. If you are going to send patches via email, they must be plain text emails, and the patch must be in the main body of the email. No MIME, base64, or printed-quotable garbage. I will silently reject emails that are not purely plain text. I should be able to write a raw copy of your message to an mbox file, and then apply it onto my code right from there, with no further processing. If you're going to be a regular contributor, it would just be easier to create a Matrix account. It doesn't have to be on my public homeserver, but it certainly can be. Note that the discussion and ultimately the decision on what to do with your patch will all happen in the Matrix room, so if you submit patches using email, you'll miss out on any feedback.

Try to keep your patches on topic—make one patch file per feature or bug fix being implemented. It is okay if your patches depend on previous patches, just indicate that in the patch. Note that it may take a while for patches to be committed, and some patches may not be committed at all. In either case, all sent patches are queued from the Matrix room into the public patch directory, so they can be referenced easier in the future. If you want to reference a submitted patch in a Matrix message or email, it might be a good idea to link to it in the public patch directory.

The public patch directory works as follows: as soon as your patch is recieved, it will be downloaded and placed in the queue/ directory. Then, if your patch is accepted, it will be moved to the accepted/ directory and then committed to the official CVS repository. If you patch is rejected for some reason, it will be moved to the rejected/ directory. Regardless of the state of your patch, it will always be permalinked in the p/ directory.

You're always welcome to inquire about rejected patches, and request they be reviewed again, or you can use them as a starting point for future patches.

License

All of the code and documentation for Telodendria is licensed under a modified MIT license. Please consult the src/header.txt file for the actual license text. The Telodendria license text differs from the MIT license in the following ways:

• Where the MIT license states that the copyright notice and permission notice shall be included in all copies or substantial portions of the software, the Telodendria license requires the copyright notice and permission notice be included in all portions—regardless of size—of the software by omitting the word substantial.

Contributors

Telodendria would not be possible without the support of the following people:

• Project Manager: Jordan Bancino <@jordan:bancino.net>
• Logo/site design: Jonah

Change Log

At this time, Telodendria does not have any tagged releases because it is not yet functional as a Matrix homeserver. Please check out the Project Status to see where things are currently at.

Resources

• Old Telodendria Versions
• Matrix Spec Mirror
• Public Patch Directory