mirror of
https://github.com/isometimes/rpi4-osdev
synced 2024-11-25 03:30:39 +00:00
259 lines
7 KiB
C
259 lines
7 KiB
C
#include "fb.h"
|
|
#include "io.h"
|
|
#include "multicore.h"
|
|
|
|
#define PWM_BASE (PERIPHERAL_BASE + 0x20C000 + 0x800) /* PWM1 register base address on RPi4 */
|
|
#define PWM_LEGACY_BASE (LEGACY_BASE + 0x20C000 + 0x800) /* PWM1 register base legacy address on RPi4 */
|
|
#define CLOCK_BASE (PERIPHERAL_BASE + 0x101000)
|
|
#define DMA_BASE (PERIPHERAL_BASE + 0x007100) /* DMA register base address */
|
|
#define DMA_ENABLE (DMA_BASE + 0xFF0) /* DMA global enable bits */
|
|
|
|
#define BCM2711_PWMCLK_CNTL 40
|
|
#define BCM2711_PWMCLK_DIV 41
|
|
#define PM_PASSWORD 0x5A000000
|
|
|
|
#define BCM2711_PWM_CONTROL 0
|
|
#define BCM2711_PWM_STATUS 1
|
|
#define BCM2711_PWM_DMAC 2
|
|
#define BCM2711_PWM0_RANGE 4
|
|
#define BCM2711_PWM0_DATA 5
|
|
#define BCM2711_PWM_FIFO 6
|
|
#define BCM2711_PWM1_RANGE 8
|
|
#define BCM2711_PWM1_DATA 9
|
|
|
|
#define BCM2711_PWM1_USEFIFO 0x2000 /* Data from FIFO */
|
|
#define BCM2711_PWM1_ENABLE 0x0100 /* Channel enable */
|
|
#define BCM2711_PWM0_USEFIFO 0x0020 /* Data from FIFO */
|
|
#define BCM2711_PWM0_ENABLE 0x0001 /* Channel enable */
|
|
#define BCM2711_PWM_ENAB 0x80000000 /* PWM DMA Configuration: DMA Enable (bit 31 set) */
|
|
|
|
#define BCM2711_GAPO2 0x20
|
|
#define BCM2711_GAPO1 0x10
|
|
#define BCM2711_RERR1 0x8
|
|
#define BCM2711_WERR1 0x4
|
|
#define BCM2711_FULL1 0x1
|
|
#define ERRORMASK (BCM2711_GAPO2 | BCM2711_GAPO1 | BCM2711_RERR1 | BCM2711_WERR1)
|
|
|
|
#define DMA_CS 0 /* Control/status register offset for DMA channel 0 */
|
|
#define DMA_CONBLK_AD 1
|
|
#define DMA_EN1 1 << 1 /* Enable DMA engine 1 */
|
|
#define DMA_ACTIVE 1 /* Active bit set */
|
|
#define DMA_DEST_DREQ 0x40 /* Use DREQ to pace peripheral writes */
|
|
#define DMA_PERMAP_1 0x10000 /* PWM1 peripheral for DREQ */
|
|
#define DMA_SRC_INC 0x100 /* Increment source address */
|
|
|
|
volatile unsigned* clk = (void*)CLOCK_BASE;
|
|
volatile unsigned* pwm = (void*)PWM_BASE;
|
|
volatile unsigned* dma = (void*)DMA_BASE;
|
|
volatile unsigned* dmae = (void*)DMA_ENABLE;
|
|
volatile unsigned* safe = (void*)SAFE_ADDRESS;
|
|
|
|
struct dma_cb {
|
|
unsigned int ti;
|
|
unsigned int source_ad;
|
|
unsigned int dest_ad;
|
|
unsigned int txfr_len;
|
|
unsigned int stride;
|
|
unsigned int nextconbk;
|
|
unsigned int null1;
|
|
unsigned int null2;
|
|
} __attribute__((aligned(32)));
|
|
|
|
struct dma_cb playback_cb;
|
|
|
|
static void playaudio_dma(void)
|
|
{
|
|
extern unsigned char _binary_audio_bin_start[];
|
|
extern unsigned char _binary_audio_bin_size[];
|
|
|
|
unsigned int size = (long)&_binary_audio_bin_size;
|
|
unsigned char *data = &(_binary_audio_bin_start[0]);
|
|
|
|
// Convert data
|
|
|
|
for (int i=0;i<size;i++) *(safe+i) = *(data+i);
|
|
|
|
wait_msec(2);
|
|
|
|
// Set up control block
|
|
|
|
playback_cb.ti = DMA_DEST_DREQ + DMA_PERMAP_1 + DMA_SRC_INC;
|
|
playback_cb.source_ad = SAFE_ADDRESS;
|
|
playback_cb.dest_ad = PWM_LEGACY_BASE + 0x18; // Points to PWM_FIFO
|
|
playback_cb.txfr_len = size * 4; // They're unsigned ints now, not unsigned chars
|
|
playback_cb.stride = 0x00;
|
|
playback_cb.nextconbk = 0x00; // Don't loop
|
|
playback_cb.null1 = 0x00;
|
|
playback_cb.null2 = 0x00;
|
|
|
|
wait_msec(2);
|
|
|
|
// Enable DMA
|
|
|
|
*(pwm+BCM2711_PWM_DMAC) =
|
|
BCM2711_PWM_ENAB + 0x0707; // Bits 0-7 Threshold For DREQ Signal = 1, Bits 8-15 Threshold For PANIC Signal = 0
|
|
*dmae = DMA_EN1;
|
|
*(dma+DMA_CONBLK_AD) = (long)&playback_cb; // checked and correct
|
|
|
|
wait_msec(2);
|
|
|
|
*(dma+DMA_CS) = DMA_ACTIVE;
|
|
}
|
|
|
|
static void audio_init(void)
|
|
{
|
|
gpio_useAsAlt0(40); // Ensure PWM1 is mapped to GPIO 40/41
|
|
gpio_useAsAlt0(41);
|
|
wait_msec(2);
|
|
|
|
// Setup clock
|
|
|
|
*(clk + BCM2711_PWMCLK_CNTL) = PM_PASSWORD | (1 << 5); // Stop clock
|
|
wait_msec(2);
|
|
|
|
int idiv = 2;
|
|
*(clk + BCM2711_PWMCLK_DIV) = PM_PASSWORD | (idiv<<12);
|
|
*(clk + BCM2711_PWMCLK_CNTL) = PM_PASSWORD | 16 | 1; // Osc + Enable
|
|
wait_msec(2);
|
|
|
|
// Setup PWM
|
|
|
|
*(pwm + BCM2711_PWM_CONTROL) = 0;
|
|
wait_msec(2);
|
|
|
|
*(pwm+BCM2711_PWM0_RANGE) = 0x264; // 44.1khz, Stereo, 8-bit (54Mhz / 44100 / 2)
|
|
*(pwm+BCM2711_PWM1_RANGE) = 0x264;
|
|
|
|
*(pwm+BCM2711_PWM_CONTROL) =
|
|
BCM2711_PWM1_USEFIFO |
|
|
BCM2711_PWM1_ENABLE |
|
|
BCM2711_PWM0_USEFIFO |
|
|
BCM2711_PWM0_ENABLE | 1<<6;
|
|
}
|
|
|
|
void playaudio_cpu()
|
|
{
|
|
int i=0;
|
|
long status;
|
|
|
|
extern unsigned char _binary_audio_bin_start[];
|
|
extern unsigned char _binary_audio_bin_size[];
|
|
|
|
unsigned int size = (long)&_binary_audio_bin_size;
|
|
unsigned char *data = &(_binary_audio_bin_start[0]);
|
|
|
|
// Write data out to FIFO
|
|
|
|
while (i < size) {
|
|
status = *(pwm + BCM2711_PWM_STATUS);
|
|
if (!(status & BCM2711_FULL1)) {
|
|
*(pwm+BCM2711_PWM_FIFO) = *(data + i);
|
|
i++;
|
|
*(pwm+BCM2711_PWM_FIFO) = *(data + i);
|
|
i++;
|
|
}
|
|
if ((status & ERRORMASK)) {
|
|
*(pwm+BCM2711_PWM_STATUS) = ERRORMASK;
|
|
}
|
|
}
|
|
}
|
|
|
|
void initProgress(void)
|
|
{
|
|
drawRect(0, 0, 301, 50, 0x0f, 0);
|
|
drawString(309, 21, "Core 0", 0x0f, 1);
|
|
|
|
drawRect(0, 60, 301, 110, 0x0f, 0);
|
|
drawString(309, 81, "Core 1", 0x0f, 1);
|
|
|
|
drawRect(0, 120, 301, 170, 0x0f, 0);
|
|
drawString(309, 141, "Core 2", 0x0f, 1);
|
|
|
|
drawRect(0, 180, 301, 230, 0x0f, 0);
|
|
drawString(309, 201, "Core 3", 0x0f, 1);
|
|
}
|
|
|
|
void drawProgress(unsigned int core, unsigned int val) {
|
|
unsigned char col = (core + 1) + ((core + 1) << 4);
|
|
|
|
// val should be 0-100
|
|
if (val == 0) drawRect(1, (60 * core) + 1, 300, (60 * core) + 49, 0x00, 1);
|
|
if (val > 0) drawRect(1, (60 * core) + 1, (val * 3), (60 * core) + 49, col, 1);
|
|
}
|
|
|
|
void core3_main(void)
|
|
{
|
|
unsigned int core3_val = 0;
|
|
|
|
clear_core3(); // Only run once
|
|
|
|
while (1) {
|
|
wait_msec(0x3FFFF);
|
|
drawProgress(3, core3_val);
|
|
if (core3_val < 100) core3_val++;
|
|
}
|
|
}
|
|
|
|
void core2_main(void)
|
|
{
|
|
unsigned int core2_val = 0;
|
|
|
|
clear_core2(); // Only run once
|
|
|
|
debugstr("Playing on CPU Core #2 using DMA... ");
|
|
playaudio_dma();
|
|
debugstr("done"); debugcrlf();
|
|
|
|
debugstr("core2_main() running still... ");
|
|
while (*(dma+DMA_CS) & 0x1) { // Wait for DMA transfer to finish - we could do anything here instead!
|
|
wait_msec(0x7FFFF);
|
|
drawProgress(2, core2_val);
|
|
if (core2_val < 100) core2_val++;
|
|
}
|
|
debugstr("done");
|
|
|
|
drawProgress(2, 100);
|
|
}
|
|
|
|
void core1_main(void)
|
|
{
|
|
clear_core1(); // Only run once
|
|
|
|
drawProgress(1, 50);
|
|
|
|
debugstr("Playing on CPU Core #1... ");
|
|
playaudio_cpu();
|
|
debugstr("done"); debugcrlf();
|
|
|
|
drawProgress(1, 100);
|
|
|
|
start_core2(core2_main); // Kick it off on core 2
|
|
}
|
|
|
|
void core0_main(void)
|
|
{
|
|
unsigned int core0_val = 0;
|
|
|
|
while (1) {
|
|
wait_msec(0x100000);
|
|
drawProgress(0, core0_val);
|
|
if (core0_val < 100) core0_val++;
|
|
}
|
|
}
|
|
|
|
void main(void)
|
|
{
|
|
fb_init();
|
|
initProgress();
|
|
|
|
unsigned int i=0;
|
|
while (i++<30) debugcrlf();
|
|
|
|
debugstr("Initialising audio unit... ");
|
|
audio_init();
|
|
debugstr("done"); debugcrlf();
|
|
|
|
start_core3(core3_main); // Kick it off on core 3
|
|
start_core1(core1_main); // Kick it off on core 1
|
|
core0_main(); // Loop endlessly
|
|
}
|