rpi4-osdev/part10-multicore/boot.S
Adam Greenwood-Byrne 44669ee990 Fixed typo
2021-02-23 12:23:48 +00:00

80 lines
1.9 KiB
ArmAsm

#define LOCAL_CONTROL 0xff800000
#define LOCAL_PRESCALER 0xff800008
#define OSC_FREQ 54000000
#define MAIN_STACK 0x400000
.section ".text.boot" // Make sure the linker puts this at the start of the kernel image
.global _start // Execution starts here
_start:
ldr x0, =LOCAL_CONTROL // Sort out the timer
str wzr, [x0]
mov w1, 0x80000000
str w1, [x0, #(LOCAL_PRESCALER - LOCAL_CONTROL)]
ldr x0, =OSC_FREQ
msr cntfrq_el0, x0
msr cntvoff_el2, xzr
// Check processor ID is zero (executing on main core), else hang
mrs x1, mpidr_el1
and x1, x1, #3
cbz x1, 2f
// We're not on the main core, so hang in an infinite wait loop
adr x5, spin_cpu0
1: wfe
ldr x4, [x5, x1, lsl #3]
cbz x4, 1b
ldr x2, =__stack_start // Get ourselves a fresh stack - location depends on CPU core asking
lsl x1, x1, #9 // Multiply core_number by 512
add x3, x2, x1 // Add to the address
mov sp, x3
mov x0, #0
mov x1, #0
mov x2, #0
mov x3, #0
br x4
b 1b
2: // We're on the main core!
// Set stack to start somewhere safe
mov sp, #MAIN_STACK
// Clean the BSS section
ldr x1, =__bss_start // Start address
ldr w2, =__bss_size // Size of the section
3: cbz w2, 4f // Quit loop if zero
str xzr, [x1], #8
sub w2, w2, #1
cbnz w2, 3b // Loop if non-zero
// Jump to our main() routine in C (make sure it doesn't return)
4: bl main
// In case it does return, halt the master core too
b 1b
.ltorg
.org 0xd8
.globl spin_cpu0
spin_cpu0:
.quad 0
.org 0xe0
.globl spin_cpu1
spin_cpu1:
.quad 0
.org 0xe8
.globl spin_cpu2
spin_cpu2:
.quad 0
.org 0xf0
.globl spin_cpu3
spin_cpu3:
.quad 0