diff --git a/part14-ethernet/include/spi.h b/part14-ethernet/include/spi.h
index 6454a72..c5fca8b 100644
--- a/part14-ethernet/include/spi.h
+++ b/part14-ethernet/include/spi.h
@@ -1,5 +1,5 @@
 void spi_init();
-unsigned int spi_send_recv(unsigned char *sbuffer, unsigned char *rbuffer, unsigned int size);
+void spi_send_recv(unsigned char *sbuffer, unsigned char *rbuffer, unsigned int size);
 void spi_send(unsigned char *data, unsigned int size);
 void spi_recv(unsigned char *data, unsigned int size);
 void spi_send_no_selection(unsigned char command);
diff --git a/part14-ethernet/kernel/arp.c b/part14-ethernet/kernel/arp.c
index 3151d64..9df07fa 100644
--- a/part14-ethernet/kernel/arp.c
+++ b/part14-ethernet/kernel/arp.c
@@ -193,18 +193,16 @@ void init_network(void)
    handle.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
    handle.Init.InterruptEnableBits = 0;
 
-   debugstr("Setting MAC address to C0:FF:EE:C0:FF:EE.");
-   debugcrlf();
-
-   ENC_SetMacAddr(&handle);
-
    debugstr("Starting network up.");
    debugcrlf();
-
    if (!ENC_Start(&handle)) {
       debugstr("Could not initialise network card.");
    } else {
       debugstr("Network card successfully initialised.");
    }
    debugcrlf();
+
+   debugstr("Setting MAC address to C0:FF:EE:C0:FF:EE.");
+   debugcrlf();
+   ENC_SetMacAddr(&handle);
 }
diff --git a/part14-ethernet/lib/spi.c b/part14-ethernet/lib/spi.c
index d71fc22..c6b0bd5 100644
--- a/part14-ethernet/lib/spi.c
+++ b/part14-ethernet/lib/spi.c
@@ -52,7 +52,7 @@ void spi_chip_select(unsigned char chip_select) {
     REGS_SPI0->cs = (REGS_SPI0->cs & ~CS_CS) | (chip_select << CS_CS__SHIFT);
 }
 
-unsigned int spi_send_recv(unsigned char *sbuffer, unsigned char *rbuffer, unsigned int size) {
+void spi_send_recv(unsigned char *sbuffer, unsigned char *rbuffer, unsigned int size) {
     REGS_SPI0->data_length = size;
     REGS_SPI0->cs = REGS_SPI0->cs | CS_CLEAR_RX | CS_CLEAR_TX | CS_TA;
     
@@ -89,7 +89,6 @@ unsigned int spi_send_recv(unsigned char *sbuffer, unsigned char *rbuffer, unsig
     }
 
     REGS_SPI0->cs = (REGS_SPI0->cs & ~CS_TA);
-    return read_count;
 }
 
 void spi_send(unsigned char *data, unsigned int size) {
diff --git a/part14-ethernet/net/enc28j60.c b/part14-ethernet/net/enc28j60.c
index 4ce5d66..0815fc6 100644
--- a/part14-ethernet/net/enc28j60.c
+++ b/part14-ethernet/net/enc28j60.c
@@ -191,7 +191,7 @@ static void calibrate(void)
  * Software delay in µs
  *  us: the number of µs to wait
  **/
-static __inline void up_udelay(uint32_t us)
+void up_udelay(uint32_t us)
 {
     volatile uint32_t i;
 
@@ -376,7 +376,8 @@ void enc_reset(ENC_HandleTypeDef *handle) {
    */
 
   handle->bank = 0; /* Initialize the trace on the current selected bank */
-  up_udelay(2); /* >1000 µs, conforms to errata #2 */
+  //up_mdelay(2);
+  HAL_Delay(2); /* >1000 µs, conforms to errata #2 */
 }
 
 /****************************************************************************
@@ -749,6 +750,11 @@ bool ENC_Start(ENC_HandleTypeDef *handle)
      * via SPI.
      */
 
+    regval = enc_rdphy(handle, ENC_PHID1);
+    debugstr("PHID1: ");
+    debughex(regval);
+    debugcrlf();
+
     regval = enc_rdbreg(handle, ENC_EREVID);
     if (regval == 0x00 || regval == 0xff) {
       return false;
@@ -756,7 +762,7 @@ bool ENC_Start(ENC_HandleTypeDef *handle)
     debugstr("Board revision: ");
     debughex(regval);
     debugcrlf();
-
+ 
     /* Initialize ECON2: Enable address auto increment.
      */
 
@@ -796,7 +802,7 @@ bool ENC_Start(ENC_HandleTypeDef *handle)
     enc_wrbreg(handle, ENC_ERXFCON, ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
 
 	do {
-		up_udelay(10); /* Wait for 10 ms to let the clock be ready */
+		HAL_Delay(10); /* Wait for 10 ms to let the clock be ready */
 		regval = enc_rdbreg(handle, ENC_ESTAT);
 	} while ((regval & ESTAT_CLKRDY) == 0);
 
@@ -879,6 +885,16 @@ bool ENC_Start(ENC_HandleTypeDef *handle)
     /* Enable the receiver */
     enc_bfsgreg(ENC_ECON1, ECON1_RXEN);
 
+    regval = enc_rdphy(handle, ENC_PHSTAT1) & PHSTAT1_LLSTAT;
+    debugstr("Link status 1: ");
+    debughex(regval);
+    debugcrlf();
+
+    regval = enc_rdphy(handle, ENC_PHSTAT2) & PHSTAT2_LSTAT;
+    debugstr("Link status 2: ");
+    debughex(regval);
+    debugcrlf();
+
     return true;
 }
 
@@ -1002,14 +1018,14 @@ void ENC_WriteBuffer(void *buffer, uint16_t buflen)
  *   buflen  - The number of bytes to read
  *
  * Returned Value:
- *   read_count - Number of bytes received
+ *   None
  *
  * Assumptions:
  *   Read pointer is set to the correct address
  *
  ****************************************************************************/
 
-static void enc_rdbuffer(void *buffer, uint16_t buflen)
+static void enc_rdbuffer(void *buffer, int16_t buflen)
 {
   /* Select ENC28J60 chip */
 
@@ -1148,8 +1164,6 @@ void ENC_Transmit(ENC_HandleTypeDef *handle)
     PT_BEGIN(pt);
 
     if (handle->transmitLength != 0) {
-        debugstr("We're actually sending"); debugcrlf();
-
         /* A frame is ready for transmission */
         /* Set TXRTS to send the packet in the transmit buffer */
 
@@ -1198,10 +1212,7 @@ void ENC_Transmit(ENC_HandleTypeDef *handle)
         } while (handle->retries > 0);
         /* Transmission finished (but can be unsuccessful) */
         handle->transmitLength = 0;
-    } else {
-        debugstr("Nothing to send"); debugcrlf();
     }
-    debugstr("We're done sending"); debugcrlf();
     PT_END(pt);
 }
 
diff --git a/part14-ethernet/net/enc28j60.h b/part14-ethernet/net/enc28j60.h
index 2c692fd..dc77865 100644
--- a/part14-ethernet/net/enc28j60.h
+++ b/part14-ethernet/net/enc28j60.h
@@ -98,10 +98,10 @@ void ENC_SPI_Send(uint8_t command);
   * Implement SPI buffer send and receive. Must be provided by user code
   * param  master2slave: data to be sent from host to ENC28J60, can be NULL if we only want to receive data from slave
   * param  slave2master: answer from ENC28J60 to host, can be NULL if we only want to send data to slave
-  * retval read_count: number of bytes read (if applicable)
+  * retval none
   */
 
-unsigned int ENC_SPI_SendBuf(uint8_t *master2slave, uint8_t *slave2master, uint16_t bufferSize);
+void ENC_SPI_SendBuf(uint8_t *master2slave, uint8_t *slave2master, uint16_t bufferSize);
 
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup ETH_Exported_Types ETH Exported Types
@@ -811,6 +811,6 @@ void ENC_GetPkcnt(ENC_HandleTypeDef *handle);
  *
  ****************************************************************************/
 
-//__inline void up_udelay(uint32_t us);
+void up_udelay(uint32_t us);
 
 #endif /* ENC28J60_H_INCLUDED */
diff --git a/part14-ethernet/net/encspi.c b/part14-ethernet/net/encspi.c
index 91c41b1..524f73f 100644
--- a/part14-ethernet/net/encspi.c
+++ b/part14-ethernet/net/encspi.c
@@ -4,14 +4,10 @@ void ENC_SPI_Select(unsigned char truefalse) {
     spi_chip_select(!truefalse); // If it's true, select 0 (the ENC), if false, select 1 (i.e. deselect the ENC)
 }
 
-unsigned int ENC_SPI_SendBuf(unsigned char *master2slave, unsigned char *slave2master, unsigned short bufferSize) {
-    unsigned int read_count = 0;
-
+void ENC_SPI_SendBuf(unsigned char *master2slave, unsigned char *slave2master, unsigned short bufferSize) {
     spi_chip_select(0);
-    read_count = spi_send_recv(master2slave, slave2master, bufferSize);
+    spi_send_recv(master2slave, slave2master, bufferSize);
     spi_chip_select(1); // De-select the ENC
- 
-    return read_count;
 }
 
 void ENC_SPI_Send(unsigned char command) {