Add some more porting instructions

This commit is contained in:
Jordan Bancino 2022-11-20 15:23:16 +00:00
parent 70fd925c98
commit d7f5a6798d
4 changed files with 166 additions and 93 deletions

View file

@ -1,88 +0,0 @@
.Dd $Mdocdate: November 20 2022 $
.Dt PACKAGE 7
.Os Telodendria Project
.Sh NAME
.Nm package
.Nd Some guidelines for packaging Telodendria for your system.
.Sh DESCRIPTION
.Pp
Telodendria is distributed at source code, and does not offer a convenient
install process. This is intentional; the Telodendria project is primarily
concerned with developing Telodendria itself, not packaging it for the
hundreds of different operating systems and Linux distributions that exist.
It is my firm belief that distributing an open source project is not the
job of the open source developer; that's the reason software distributions
exist, to collect and distribute software.
.Pp
It would be impossible to package Telodendria for every platform, because
each platform has very different expectations for software. Even different
Linux distributions have different conventions for where manual pages,
binaries, and configuration files go.
.Pp
That being said, this page aims to assist those who want to package
Telodendria, or just install it from source, though that's not recommended.
.Pp
See
.Xr td 8
for instructions on how to build Telodendria. Only proceed with packaging
Telodendria after you have successfully built it on your operating system.
.Pp
To package Telodendria, you should collect the following files, and figure
out where they should be installed for your system:
.Bl -bullet
.It
The telodendria server binary itself:
.Pa build/telodendria
.It
All manual pages in the
.Pa man/
directory that are prefixed with "telodendria". These are the user documentation
pages. All pages that do not have the "telodendria" prefix are intended only
for developers, and so do not need to be installed to the system.
.It
An init script. People that wish to install Telodendria to their system
expect it to be integrated enough that Telodendria can be easily started at
boot, and otherwise managed by the system's daemon tools, be it systemd, or
another init system. Consult your system's documentation for writing an
init script. Do note that Telodendria does not fork itself to the background;
the init script should do that. Also note that Telodendria responds to SIGINT,
so a SIGINT should be sent to stop Telodendria instead of a SIGTERM or SIGKILL.
.It
A sample
.Pa telodendria.conf
file. Whether this file is placed at the actual configuration file location,
or a directory containing configuration file samples is entirely up to the
packager. You can use or adapt any of the configuration files in
.Pa contrib/ ,
or write your own specifically for your package.
.El
.Pp
Once you have collected the files that need to be installed, make sure your
package performs the following tasks on install:
.Bl -bullet
.It
If necessary, depending on the config used, create a new system user for
the Telodendria daemon to run as.
.It
If conventional for your system, enable the Telodendria init script so
that Telodendria is started on system boot.
.It
Insruct the user to carefully read the sample
.Pa telodendria.conf
as well as the
.Xr telodendria.conf 5
manual page before starting Telodendria.
.El
.Pp
The goal of a package should be to get everything as ready-to-run as possible.
The user should only have to change one or two default options in the configuration
file before Telodendria can be started.
.Pp
Remember to publicly document the setup of Telodendria on your platform so
that users can easily get Telodendria running. If you're packaging Telodendria
for a containerization system such as Docker, you can omit the things that
containers typically do not have, such as the init script and man pages.
.Sh SEE ALSO
.Xr telodendria-contributing 7 ,
.Xr td 8 ,
.Xr telodendria 7

159
man/man7/porting.7 Normal file
View file

@ -0,0 +1,159 @@
.Dd $Mdocdate: November 20 2022 $
.Dt PORTING 7
.Os Telodendria Project
.Sh NAME
.Nm porting
.Nd Some guidelines for packaging Telodendria for your operating system.
.Sh DESCRIPTION
.Pp
Telodendria is distributed at source code, and does not offer a convenient
install process. This is intentional; the Telodendria project is primarily
concerned with developing Telodendria itself, not packaging it for the
hundreds of different operating systems and Linux distributions that exist.
It is my firm belief that distributing an open source project is not the
job of the open source developer; that's the reason software distributions
exist, to collect and distribute software.
.Pp
It would be impossible to single-handedly package Telodendria for every
platform, because each platform has very different expectations for
software. Even different Linux distributions have different conventions
for where manual pages, binaries, and configuration files go.
.Pp
That being said, this page aims to assist those who want to package
Telodendria for their operating system or software distribution.
.Pp
See
.Xr td 8
for instructions on how to build Telodendria. Only proceed with packaging
Telodendria after you have successfully built it on your operating system.
.Pp
To package Telodendria, you should collect the following files, and figure
out where they should be installed for your system:
.Bl -bullet
.It
The telodendria server binary itself:
.Pa build/telodendria
.It
All manual pages in the
.Pa man/
directory that are prefixed with "telodendria". These are the user documentation
pages. All pages that do not have the "telodendria" prefix are intended only
for developers, and so do not need to be installed to the system.
.It
An init script. People that wish to install Telodendria to their system
expect it to be integrated enough that Telodendria can be easily started at
boot, and otherwise managed by the system's daemon tools, be it systemd, or
another init system. Consult your system's documentation for writing an
init script. Do note that Telodendria does not fork itself to the background;
the init script should do that. Also note that Telodendria responds to SIGINT,
so a SIGINT should be sent to stop Telodendria instead of a SIGTERM or SIGKILL.
.It
A sample
.Pa telodendria.conf
file. Whether this file is placed at the actual configuration file location,
or a directory containing configuration file samples is entirely up to the
packager. You can use or adapt any of the configuration files in
.Pa contrib/ ,
or write your own specifically for your package.
.El
.Pp
Once you have collected the files that need to be installed, make sure your
package performs the following tasks on install:
.Bl -bullet
.It
If necessary, depending on the config used, create a new system user for
the Telodendria daemon to run as.
.It
If conventional for your system, enable the Telodendria init script so
that Telodendria is started on system boot.
.It
Insruct the user to carefully read the sample
.Pa telodendria.conf
as well as the
.Xr telodendria.conf 5
manual page before starting Telodendria.
.El
.Pp
The goal of a package should be to get everything as ready-to-run as possible.
The user should only have to change one or two default options in the configuration
file before Telodendria can be started.
.Pp
Remember to publicly document the setup of Telodendria on your platform so
that users can easily get Telodendria running. If you're packaging Telodendria
for a containerization system such as Docker, you can omit the things that
containers typically do not have, such as the init script and man pages.
.Pp
Also remember that your port should feel like it belongs on your target system.
Follow all of your system's conventions when placing files on the filesystem,
so your users know what to expect. The goal is not to have a unified experience
across all operating systems, rather, you should cater to the opinions of your
operating system. Telodendria is architected in such a way that it does not
impose the developers opinions of where things should go.
.Sh PORTS REPOSITORY
.Pp
The Telodendria project provides a
.Pa Telodendria-Ports
repository that is intended to serve as the official staging environment for
ports and packages of Telodendria to various operating systems. You can
most likely take inspiration from the files stored in this repository, or even
straight up copy and modify files for your own port if you'd like.
Telodendria-Ports is a convenient resource for new porters. You can grab
a copy of the ports repository like this:
.Bd -literal -offset indent
$ cvs -d anoncvs@bancino.net:/cvs checkout -P Telodendria-Ports
.Ed
.Pp
(It is assumed that you have read
.Xr telodendria-contributing 7 ,
so you already have the proper tools for getting the ports repository.)
.Pp
The repository is structured in such a way that each operating system or
software distribution has a directory. For example, the OpenBSD port has an
.Pa OpenBSD/
directory. If you make a HaikuOS port, then make a
.Pa HaikuOS/
directory.
.Pp
The structure of the operating system directories themselves is really defined
by the conventions of the packaging system you're working with. There's no standard
structure, as each system does things differently. Just use the directory as a
working space that stores all the files your packaging system needs to build
a package for Telodendria.
.Pp
The exact procedure for interacting with this repository is also defined by how
your packaging system works. For OpenBSD, one is required to copy the
.Pa OpenBSD/
directory to
.Pa /usr/ports/net/telodendria ,
and then copy files back and forth when modifications are made. You may be able
to get away with building your package in place, without having to copy files
anywhere. Otherwise, you can try symlinking directories, but OpenBSD ports did
not like this at all.
.Pp
Submitting your port files to Telodendria-Ports is by no means required,
but it may be helpful to have a public record that you're working on a port,
and it's definitely helpful to have a consolidated list of all the ports out
there, making it much easier to determine whether or not a given platform
has a port, especially if you're unfamilier with that platform's port system.
If you are capable of managing your port entirely within your packaging system,
then go for it! I just wanted a staging environment that I have commit access to
for my ports, allowing me to prototype and test my port before submitting it
to the actual ports tree.
.Pp
It is important to note that I only maintain the OpenBSD port, because that's
the operating system I use. But, notice that I follow my own rules; nothing
inherently OpenBSD-specific, besides a few optional files in
.Pa contrib/ ,
actually exists in the main repository. All operating-system specific files,
such as init scripts and the like, should go to Telodendria-Ports. It's also
important to note that the files placed in Telodendria-Ports are not automatically
assumed to be official builds. The developer that committed the files to
Telodendria-Ports will most likely also have to get them submitted upstream,
because I'm not going to go to all these upstream packagers with the port files
here, I'll only do that with ports I officially maintain, which is the
OpenBSD port.
.Pp
.Sh SEE ALSO
.Xr telodendria-contributing 7 ,
.Xr td 8 ,
.Xr telodendria 7

View file

@ -1,4 +1,4 @@
.Dd $Mdocdate: November 18 2022 $
.Dd $Mdocdate: November 20 2022 $
.Dt TELODENDRIA 7
.Os Telodendria Project
.Sh NAME
@ -64,8 +64,10 @@ ll.
#telodendria:bancino.net;The public "space" room.
#telodendria-releases:bancino.net;Get notified of new releases.
#telodendria-general:bancino.net;General discussion and support.
#telodendria-newsletter:bancino.net;Periodic status updates.
#telodendria-issues:bancino.net;Report bugs and issues.
#telodendria-patches:bancino.net;Submit code patches to the project.
#telodendria-ports:bancino.net;Discussion about porting and packaging.
.TE
.Pp
.Nm

View file

@ -111,7 +111,7 @@ package yourself.
<p>
If your operating system does <i>not</i> have a package or port of
<b>Telodendria</b>, please consult the
<a href="/man/man7/package.7.html">package(7)</a> page for guidelines
<a href="/man/man7/porting.7.html">porting(7)</a> page for guidelines
related to packaging <b>Telodendria</b> for your system.
</p>
<h2 id="documentation">Documentation</h2>
@ -162,10 +162,10 @@ Contributing guide.
<th>Description</th>
</tr>
<tr>
<td><a href="man/man7/package.7.html">package(7)</a></td>
<td><a href="man/man7/porting.7.html">porting(7)</a></td>
<td>
Want to package Telodendria for your operating system, or just install it to
your system from source? Look no further than this page.
Want to package Telodendria for your operating system?
Look no further than this page.
</td>
</tr>
<tr>